Business
Red Eagle Mining intercepts 2.8 metres at 30 grams gold per tonne
Red Eagle Mining intercepts 2.8 metres at 30 grams gold per tonne.
About this update from Red Eagle Mining Corp
[{"type":"text","content":"\n\n\n\nRed Eagle Mining intercepts 2.8 metres at 30 grams gold per tonne\n\n/* Style Definitions */\nspan.prnews_span\n{\nfont-size:8pt;\nfont-family:\"Arial\";\ncolor:black;\n}\na.prnews_a\n{\ncolor:blue;\n}\nli.prnews_li\n{\nfont-size:8pt;\nfont-family:\"Arial\";\ncolor:black;\n}\np.prnews_p\n{\nfont-size:0.62em;\nfont-family:\"Arial\";\ncolor:black;\nmargin:0in;\n}\n\n\n\n\n\n\nRed Eagle Mining intercepts 2.8 metres at 30 grams gold per tonne\nPR Newswire\nVANCOUVER, June 1, 2016\n\n\n\nVANCOUVER, June 1, 2016 /PRNewswire/ - Red Eagle Mining Corporation (TSX-V: RD, OTCQX: RDEMF, SSE-V: RDCL) is pleased to announce that detailed ore production stope delineation drilling has commenced at the San Ramon Gold Mine, Santa Rosa Gold Project, Antioquia, Colombia and will continue for the life of the mine.  Highlights from the first four holes (SRD-0001 to SRD-0005) include intercepts:\n\n\nSRD-0003 - 4.00m at 10.68 g/t Au from 60.70m down hole (incl. 1.10m at 27.38 g/t Au) \nSRD-0004 - 7.80m at 12.79 g/t Au from 71.40m down hole (incl. 2.80m at 30.44 g/t Au) \nSRD-0005 - 8.15m at 5.71 g/t Au from 96.20m down hole (incl. 1.60m at 15.65 g/t Au)\n\n\n\"The initial results from the in-fill drill programme have exceeded our expectations with intercepts significantly longer than our average mining width of 3.00m and grades significantly higher than our reserve grade of 5.20 g/t Au\", comments Bob Bell, Chief Operating Officer.\n\nHole SRD-0002 was abandoned.  For complete drill results, please see Table 1 – Drill Hole Intercepts, Table 2 – Drill Hole Specifications, Figure 1 – Long Section and Figure 2 – Cross Section.  True widths are estimated to be 70-90% of the intercepts and vertical depths are estimated to be 70-90% of the drilled depths reported below.  Drill assays were composited by length-weighted averaging into intersections using a 2.00 g/t Au cut-off grade.   Due to the mining method and mining selectivity contemplated for the deposit, internal dilution was included in some intersections where considered appropriate for mining continuity.  For photographs of the drill core see Red Eagle Mining's Flickr.\n\nQuality Assurance and Quality Control\n\nAll drill samples were collected with a diamond core drill rig using approximately one metre sample intervals followin...