Business
Winston Tailings Project: Batch 1 Assay Results
Panther Metals PLC has issued a correction notice for its Winston Tailings Project Batch 1 assay results, clarifying that the Gallium (Ga) and Indium (In) data columns were erroneously reversed in a previous announcement. The corrected results, which support or exceed prior preliminary assays, show consistent grades across vertical depths and laterally between four Vibracore hole locations (WT-26-001 to WT-26-004) with tested vertical profiles ranging from 4.15m to 12.20m. This consistency is seen as highly important for predictable processing and scalable production, bolstering confidence in the project's potential for gold, gallium, silver, zinc, copper, and cobalt. Disclaimer*
About this update from Panther Metals Plc
[{"type":"text","content":"\n\n \n \nPANTHER METALS PLC\n(\"Panther\" or the \"Company\")\n(Incorporated in the Isle of Man with company number 009753V)\nCorrection Notice for Winston Tailings Project: Batch 1 Assay Results\nThe following amendment has been made to the 'Winston Tailings Project: Batch 1 Assay Results' announcement (the \"Announcement\") released on 17 March 2026 at 07:00 under RNS number: 8638W.\nIn the Announcement, the data columns for Gallium (Ga) and Indium (In) were erroneously reversed during formatting which has been corrected in the restated announcement below. Corrected Table 1 in this release shows corrected columns.\n\nAll other details remain unchanged.\n\n\n17 March 2026\nWinston Tailings Project: Batch 1 Assay Results\nPanther Metals Plc (LSE: PALM), the exploration company focused on mineral projects in Canada, is very pleased to report the first batch of Vibracore sample assay results for the Winston Tailings Project near Schrieber, Ontario, Canada.\nThe Vibracore tailings sampling is in support of the Mineral Resource estimate (\"MRE\") programme, the first of a series of ongoing workstreams progressing to quantify, evaluate and permit the contained high-grade gold (Au), gallium (Ga), silver (Ag), zinc (Zn), copper (Cu), indium (In) and cobalt (Co) and other recoverable minerals located within the historic Winston Lake Mine tailings storage facility (\"TSF\").\nKey points:\n· First batch of tailings core sample assay results (Table 1) received for four Vibracore collar locations (WT-26-001, WT-26-002, WT-26-003 & WT-26-004) situated on part of a single east-west profile (Figure 1), varying in thickness from 4.15m to 12.20m (Table 2).\n \n· Samples comprise HQ core (63.5mm) diameter cylinders of tailings material through the vertical profile of the tailings, collected from the surface of the tailings (situated below ice and water cover) to the base of the tailings.\n \n· Results show good grade consistency across the vertical depth-profile and laterally between Vibracore hole collar locations.\n \n· The results support or exceed the 2025 preliminary assay results announced 31 July 2025.1\nDarren Hazelwood, Chief Executive Officer commented:\n\"The continuity of mineralisation and grade we are seeing gives us increasing conf...