MAX drills 42.7 m of 37.5 g/t (1.21 oz/t) Ag and 0.38% Cu at Majuba Hill; includes 10.7 m of 90.2 g/t (2.90 oz/t) Ag and 0.93% Cu

About this update from Max Resource Corp

[{"type":"text","content":"\n\n\n\n\n\nTSX-V: MXR\nOTC BB: MXROF\nFrankfurt: M1D\n\n\nVANCOUVER, Sept. 27, 2011 /CNW/ - Max Resource Corp. (TSXV: MXR); (OTCBB: MXROF); (Frankfurt: M1D) has received initial results from an eight hole drill program recently\n completed at its Majuba Hill copper/silver project in Nevada. A total\n of eight holes (1,112 meters) were drilled at Majuba Hill and results\n received from the first three holes include an intercept of 42.7 m of 37.5 g/t Ag and 0.38% Cu in hole MM-03, inclusive of 10.7 m of 90.2 g/t Ag and 0.93% Cu. Drill results from the remaining five holes are pending.\n\n\nHole MM-03 was the first of four holes drilled to test results reported\n by Minterra Resource Corp. from a reverse-circulation drill program\n conducted in 2007 (see our news release of March  4, 2011). This hole\n was drilled to a depth of 122.5 meters at the same location as\n Minterra's drill hole MH-03. This core drill hole confirmed higher\n results for both copper and silver than previously reported, with some\n silver results almost double those reported by Minterra due to the\n improved sample recovery provided by core drilling. Over the entire\n length of hole MM-03, a comparison of assay results showed an average\n 49.4% increase in copper values and 43.4% increase in silver values\n over the results announced by Minterra in 2008.\n\n\nThe other two drill holes at Majuba Hill, MM-13 and MM-15, were drilled\n at the top of Majuba Hill to test zones outside of the area drilled by\n Minterra and intercepted anomalous copper and silver (in excess of 3\n g/t Ag) over their entire length. Hole MM-13 was drilled above hole\n MM-03 and to the north west, to test areas of strong surface copper\n soil anomalies from earlier work conducted by Mine Finders, while Hole\n MM-15 was drilled at the same location to the south east on the west\n side of the Majuba fault to test the potential of that area.\n\n\nThe complete assay results are as follows:\n\n\nHole\n\n\nAngle\n\n\nTotal Depth\n\n\nFrom (m)\n\n\nTo (m)\n\n\nThickness (m)\n\n\nCu (%)\n\n\nAg (g/t)\n\n\n \n\n\n \n\n\n \n\n\n \n\n\n \n\n\n \n\n\n \n\n\n \n\n\nMM-03\n\n\n-70\n\n\n158.6\n\n\n91.4\n\n\n134.1\n\n\n42.7\n\n\n0.38%\n\n\n37.5 g/t\n\n\nincludes\n\n\n \n\n\n \n\n\n102.1\n\n\n112.8\n\n\n10.7\n\n\n0.93%\n\n...

More updates from Max Resource Corp