Gungnir Drills 2.14% Nickel over 3.3 Metres, 5.15% Nickel over 0.73 Metres, 9.8 Metres of 0.82% Nickel and 349 g/t Silver over 1.72 Metres at Lappvattnet

About this update from Gungnir Resources Inc

[{"type":"text","content":"Gungnir Drills 2.14% Nickel over 3.3 Metres, 5.15% Nickel over 0.73 Metres, 9.8 Metres of 0.82% Nickel and 349 g/t Silver over 1.72 Metres at LappvattnetSURREY, BC / ACCESSWIRE / September 7, 2022 / Gungnir Resources Inc. (TSXV:GUG, OTC PINK:ASWRF) (\"Gungnir\" or the \"Company\") is pleased to report further assays from drilling at the Lappvattnet nickel deposit in northern Sweden. Results are for three drill holes, LAP22-06B, -08 and -09. To date in 2022, the Company has drilled a total of approximately 2,800 metres in 18 holes with further results to follow from drill hole LAP22-10 onward. Please view accompanying map (see Figure 1).\"Our nickel resource drill-off at Lappvattnet continues. Holes reported today were drilled to further define the limits and trend of the main peridotite body in the western part of the deposit. All three holes recorded a 5% or better nickel assay and a bonanza silver hit of 349 g/t in hole LAP22-09. Initial indications suggest both upper and lower contacts of the peridotite could be favourable sites for higher-grade concentrations of precious metals, silver as well as platinum group metals, including previously reported 44.9 g/t platinum, and 39.0 g/t platinum with 11.8 g/t palladium all of which can be valuable by-products in massive nickel sulphide deposits\", commented Jari Paakki, CEO.Results TableResults are from continuing, systematic drilling of the Lappvattnet nickel deposit with the goal of upgrading and expanding the existing resource with a focus on defining further high-grade nickel shoots.Drilling has now progressed to the sparsely drilled eastern two-thirds of the deposit where the resource is based on just thirteen drill intercepts, six of which contain individual assays of greater than 5% Ni. Our current drilling in this area to date includes holes LAP22-16 to -19 which are currently being logged and prepped for cutting. Holes LAP22-12 to LAP22-15 tested the Lappvattnet north target. Hole LAP22-11 was not drilled. All assays are pending.Holes LAP-06B, -08 and -09 were drilled between Sections 10E and 12E to define part of the upper contact of the main peridotite body, the key source rock for nickel (see Figure 1). Peridotite was intersected in two of the three holes, LAP22-6B (1.6 metre core length) and LAP22-08 (6 metre core length), the latter of which produced the wider nickel ...

More updates from Gungnir Resources Inc