Galway Metals Intersects 24.0m Massive Sulphides in Deepest Intersection Ever; 24.0 g/t AuEq Over 2.95m plus 16.1 g/t AuEq Over 3.0m; Cu Stringer Zones to 9.0m and up to 5.2% Cu Over 0.5m at 300m below Resource Hole at Estrades in Quebec

About this update from Galway Metals, Inc.

[{"type":"text","content":"Galway Metals Intersects 24.0m Massive Sulphides in Deepest Intersection Ever; 24.0 g/t AuEq Over 2.95m plus 16.1 g/t AuEq Over 3.0m; Cu Stringer Zones to 9.0m and up to 5.2% Cu Over 0.5m at 300m below Resource Hole at Estrades in QuebecTORONTO, ON / ACCESSWIRE / September 2, 2021 / Galway Metals Inc. (TSXV:GWM)(OTCQB:GAYMF) (the \"Company\" or \"Galway\") is pleased to announce some results from its 2021 drill program at its Estrades property in the Northern Abitibi of western Quebec (Figure 1; Figure 2). The Estrades project was previously mined via a 200-metre-deep ramp, with production in 1990-91 totaling 174,946 tonnes grading 12.9% Zn, 6.4 g/t Au, 1.1% Cu and 172.3 g/t Ag. Recent drilling at the former high-grade mine mainly targeted zones open to depth that are high in copper grades and other metals, and also targeted shallower gaps within the resource area to increase the resource and enhance continuity.Deepest hole at Estrades Intersected 24m of massive sulphides with zinc grades as high as 11.4%Galway intersected 24 metres of Massive Sulphides in hole 64A (16.1m true width; see photos; Figure 3) on the copper-rich eastern portion of the Estrades resource area, which, at -1km vertical, represents the deepest intersection drilled on the property in its history. This is also far wider than the average width of the resource. While it didn't all return resource grades, grades as high as 11.4% Zn + 1.0 g/t Au over 0.7m were received. Galway plans on using this in conjunction with other drill results, plus Titan IP and EM as well as gravity geophysical surveys to vector into a potential high-grade and wide source vent in the area.Drilling 300m below copper-rich resource hole returned 9m of copper stringers with results up to 5.2% copperAlso below the copper-rich eastern area, Galway followed up on previous results, such as 7.4% Cu over 1.9m at -309m vertical in hole 5, and the deepest hole at -392m of 9.3% Cu over 0.9m. Two new holes, 59A and 60 (original hole 59 veered off target and was stopped short of the zone), were drilled with 5 wedges (3 from 59A and 2 from 60). Results have been returned for two intersections, with copper stringer zones present to 9.0m wide and with grades up to 5.2% Cu over 0.5m, within 1.9% Cu over 3.75m in wedge hole 59AW1, located 300m below the deepest resource hole that returned 9.3% Cu over 0....

More updates from Galway Metals, Inc.