Business
Berkwood Resources Continues to drill Massive Graphite Intersections
December 21st, 2017 / TheNewswire / VANCOUVER, B.C. Berkwood Resources Ltd. (TSX-V: BKR, FSE: BK2, WKN: A110N3) ("Berkwood" or the "Company") is pleased to anno
About this update from First Canadian Graphite Inc.
[{"type":"text","content":"December 21st, 2017 / TheNewswire / VANCOUVER, B.C. Berkwood Resources Ltd. (TSX-V: BKR, FSE: BK2, WKN: A110N3) (\"Berkwood\" or the \"Company\") is pleased to announce that it has completed the first five drill holes on the Phase Two drill program on the Company's Zone 1 Graphite body. Further to the news release dated December 8th, 2017 whereby the Company announced a massive Graphite intercept of over 70 meters in length and close to surface, the Company is very pleased to announce that it has been successful in not only continuing to drill large intersections of Graphite but that it has drilled one intercept of over 107 meters thick. All five of the holes drilled in the phase 2 drill program on the Company's Zone 1 Graphite Body was successful in intersecting large intervals of graphite mineralisation. Four HQ holes were drilled on an east-west line that crosses the area on Section 3100E around the initial holes BK1-03-17 and BK1-04-17, drilled on a northerly azimuth, and a fifth started another section to the north. The five holes totalled 719 m of HQ drilling. The results of these five drill holes are as follows. BK1-14-17 collared about 25 m east of the section line at 090? at -60?, as per the news release dated December 8th, 2017. The oriented core used in Phase 2 indicated that the foliation dipped sub vertically and had an azimuth to the north-northwest. BK1-15-17 collared about 10 m west of BK1-14-17 on the same site as BK1-14-17 with a 270? azimuth and inclined at -45? west to a length of 145.35 m. The major graphite interval started at 47.2 m and ended at 116.2 m The graphite zone was 69 m and continuous with an estimated true width of 56 m. The last few runs intersected several narrower graphite intervals. BK1-16-17 collared on a new site ~25 m west of BK1-15-17, just west of Section 3100E with an azimuth of 090? and inclination of -60? east with a length of 145.35 m again. It intersected continuous graphite of typical grade ranges from high-grade to medium and less low grades from18.3 to 125.4 m (107.1 m). The true width is about 61 m. BK1-17-17 was sited east of BK1-16-17 to create a scissors intersection at the tops of the holes for geological overlap. It is oriented 270? azimuth and inclined at -45? west to a length of 186 m. It intersected a major graphite zone from 47.7 - 138.5 m (90.8 m) with a true width of...