Business
Eco Depot Inc announces excellent ASTM Water Vapor transmission test results
Eco Depot Inc announces excellent ASTM Water Vapor transmission test results.
About this update from Eco Depot, Inc.
[{"type":"text","content":"\n\n\n\nEco Depot Inc announces excellent ASTM Water Vapor transmission test results\n\n/* Style Definitions */\nspan.prnews_span\n{\nfont-size:8pt;\nfont-family:\"Arial\";\ncolor:black;\n}\na.prnews_a\n{\ncolor:blue;\n}\nli.prnews_li\n{\nfont-size:8pt;\nfont-family:\"Arial\";\ncolor:black;\n}\np.prnews_p\n{\nfont-size:0.62em;\nfont-family:\"Arial\";\ncolor:black;\nmargin:0in;\n}\n\n\n\n\n\n\nEco Depot Inc announces excellent ASTM Water Vapor transmission test results\nPR Newswire\nTORONTO, Sept. 27, 2021\n\n\n\nTORONTO, Sept. 27, 2021 /PRNewswire/ -- Eco Depot Inc. (OTC Pink: ECDP), a Nevada company, is pleased to announce the following ASTM E-96 Water Vapor Transmission test results in accordance with the IBC International Building Code & IRC International Residential Code Vapor Retarder Specifications on its Bronya Climate Shield Faсade and Aquablock product line.\n\n \n \n \n \n \n \n\n \nBronya Canada Group submitted our Bronya Climate Shield Faсade and Aquablock Product for testing at SEREX Labs, a Canadian Government approved testing center to conduct American Standard Testing Method (ASTM) tests.\nASTM E-96 was used to determine the water vapor transmission for outdoor use. The six fiber cement samples coated with the \"BCS Aquablock\" and \"BCS Facade\" formulations (two coats of 10 mils wet) were installed inside stainless steel trays (Figure 1) in order to seal the perimeter of the samples with a mixture of beeswax and rosin (50/50). The trays are fitted with a cavity at their base allowing an average quantity of water of 275g to be placed in order to simulate outdoor exposure with a relative humidity content of 100%. The painted surface of the sample faced the water in the tray, while the unfinished portion was exposed to ambient air. When mounting the samples in their respective trays, a minimum distance of 6 mm between the sample and the water was observed. \nThe initial mass of the six assemblies was taken, then they were installed in a conditioning chamber adjusted to a temperature of 23°C ± 1°C and a relative humidity of 50% ± 2%. Subsequently, a daily mass gain was performed excluding weekends. The measurement took place over a period of six weeks in order to obtain the loss of mass as a function of exposure time (g/h) allowing the...