Business
DLP Resources Intersects 66m of 0.42% Cu and 4.89g/t Ag Within a 202m Interval of 0.25% Cu and 2.93g/t Ag on the Aurora Project in Southern Peru
Cranbrook, British Columbia--(Newsfile Corp. - June 25, 2024) - DLP Resources Inc. (TSXV: DLP) (...
About this update from Dlp Resources, Inc.
[{"type":"text","content":"DLP Resources Intersects 66m of 0.42% Cu and 4.89g/t Ag Within a 202m Interval of 0.25% Cu and 2.93g/t Ag on the Aurora Project in Southern PeruCranbrook, British Columbia--(Newsfile Corp. - June 25, 2024) - DLP Resources Inc. (TSXV: DLP) (OTCQB: DLPRF) (\"DLP\" or the \"Company\") announces receipt of complete drill results for drillhole, A24-014 on the Aurora porphyry copper-molybdenum-silver project in southern Peru. (Figure 1). In addition, a second drill rig is on site to assist with the expansion drilling in 2024.Results for the first thirteen drillholes, A22-001, A22-002, A22-003, A23-004, A23-005, A23-006, A23-007, A23-008, A23-009, A23-010, A23-011, A23-012 and A23-013 were last released on January 04, 2023. (see DLP Resources Inc., news release of January 04, 2024, for results for the thirteen drillholes). HighlightsDrillhole A24-014 was drilled approximately 250m northeast of drillhole A23-013 and intersected copper and silver mineralization throughout the hole to a depth of 641.30m. The hole was stopped at 641.30m due to faulting and fracturing between 273m and 332m and did not get into the planned molybdenum zone at depth. Mineralized intervals are indicated below.534.30m at 0.14% Cu and 2.09g/t Ag from 107.00m to 641.30m.202.00m at 0.25% Cu and 2.93g/t Ag from 107.00m to 309.00m.66m at 0.42% Cu and 4.89g/t Ag from 219.00m to 285.00m.The complete set of results for A24-014 are summarized in Table 1 below.A second drill rig is currently on site and drilling the NE target. Mr. Gendall, President and CEO commented: \"A24-014 was the first step-out hole to the NE to extend copper mineralization into the undrilled NE zone where previously reported reconnaissance mapping and sampling identified copper and molybdenum mineralization in rock samples on surface. This hole was drilled at a higher elevation to intersect greater copper mineralization in the upper levels of the drillhole. Unfortunately, the hole did not get into the molybdenum zone due to faulting which resulted in the hole being stopped short of the planned 1000m depth. We are very encouraged with the copper results from drillhole A24-014 and will continue to trace the copper enrichment to the northeast and southeast with continued drilling with two drill rigs in 2024.\" Aurora Cu-Mo Project - Summary of Drill Results for A24-014Drill hole A24-014 (Figures 2,3 a...