Business
Cascade Copper Completes LiDAR and Orthophoto Survey at Rogers Creek
(TheNewswire) Ultra-High-Resolution (50 pts/m ) LiDAR Surveying Hig...
About this update from Cascade Copper Corp.
[{"type":"text","content":"Cascade Copper Completes LiDAR and Orthophoto Survey at Rogers Creek\n \n \n (TheNewswire)\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n Ultra-High-Resolution (50 pts/m\n \n \n ) LiDAR Surveying\n \n \n \n \n \n \n High-Definition (8-10cm Resolution)\nOrthophoto Imaging\n \n \n \n \n \n \n Calgary, A\n \n \n B\n \n \n -\n \n \n TheNewswire -\n \n \n May 17, 2023 -\n \n \n Cascade Copper Corp.\n \n \n (CSE:CASC)\n \n \n (“\n \n \n Cascade\n \n \n ” or the “\n \n \n Corporation\n \n \n ”) is pleased to announce the\ninitial results of a 59.6 km\n \n \n 2\n \n \n ultra-high-resolution LiDAR and\nhigh-definition orthophoto imaging survey encompassing all of Targets\nI, II, and III on the Rogers Creek Project, in BC. Canada. Data\nquality is extremely high, giving a clear image of the status of all\nroads and bridges throughout the project, including newly developed\ninfrastructure that will permit much easier access to unexplored\nareas. The LiDAR survey produced a highly accurate digital elevation\nmodel (DEM) to be used in future exploration endeavors potentially\nincluding drone surveying, structural interpretation, 3D modelling,\nartificial intelligence, and drill planning.\n \n \n \n \n \n \n Jeff Ackert, President\nand CEO remarks “I am very much impressed with the detailed imagery\nand DEM Hillshades that have recently been acquired for the Rogers\nCreek Project.  Of particular interest is the bare earth model LiDAR\nimagery which clearly reveals evidence of structures, geologic\nboundaries, and waterways.  This information will certainly help us\nwith our planned exploration for this year as well as creating a\nproper 3D surface to reference all our geological and geophysical\ndata.”\n \n \n \n \n Acquisition Details\n \n \n \n \n The survey was acquired by Pioneer Exploration\nConsultants out of Ottawa, Ontario who are the same team that\ncommercialized the first drone-magnetics system in Canada and brought\nLiDAR to the forefront. An impressive average LiDAR point density of\n50 pts/m\n \n \n 2\n \n \n and orthophoto imagery resolution of 8-10cm was obtained.\nThe survey was flown in a helicopter at a low altitude to optimize\ndata collection and covered approximately 75% of the Rogers Creek\nProject.\n \n \n \n...