Business
2,462 meters of surface diamond drilling was done on the Abcourt-Barvue property in December 2016 and January 2017 and in most cases, excellent results were obtained
(via TheNewswire) Mont-St-Hilaire, Quebec, Canada / TheNewswire / February 21 , 2...
About this update from Abcourt Mines, Inc. Class B
[{"type":"text","content":"2,462 meters of surface diamond drilling was done on the Abcourt-Barvue property in December 2016 and January 2017 and in most cases, excellent results were obtained(via TheNewswire)\n \n \nMont-St-Hilaire, Quebec, Canada / TheNewswire / February 21, 2017\n\n \n \nMr. Renaud Hinse, President and Chief Executive Officer of Abcourt Mines Inc. (TSX-V: ABI, Berlin: AML-BE and Frankfurt Stock Exchanges: AML-FF) (\"Abcourt\" or the \"Company\") is pleased to announce that 10 surface holes were drilled, for a total of 2,462 meters, on the Abcourt-Barvue property located near Val-d'Or, Quebec, Canada, and in most cases, excellent results were obtained. See below:\n\n \n\nHole\n\n\n\nNo.\n\n\n\n\nFrom\n\n\n\nm\n\n\n\n\nTo\n\n\n\nm\n\n\n\n\nLength\n\n\n\nm\n\n\n\n\nAg\n\n\n\ng/t\n\n\n\n\nZn\n\n\n\n%\n\n\n\n\nAB 16-06\n\n\n\n\n211.5\n\n\n\n\n219.0\n\n\n\n\n7.50\n\n\n\n\n66.8\n\n\n\n\n2.66\n\n\n\n\nAB16-07\n\n\n\n\n172.0\n\n\n\n\n176.0\n\n\n\n\n4.00\n\n\n\n\n43.0\n\n\n\n\n1.86\n\n\n\n\nAB16-08\n\n\n\n\n251.0\n\n\n\n\n254.6\n\n\n\n\n3.60\n\n\n\n\n21.9\n\n\n\n\n6.08\n\n\n\n\nAB16-09\n\n\n\n\n220.5\n\n\n\n\n230.5\n\n\n\n\n10.00\n\n\n\n\n47.8\n\n\n\n\n1.55\n\n\n\n\nAB16-10\n\n\n\n\n222.0\n\n\n\n\n231.1\n\n\n\n\n9.10\n\n\n\n\n41.5\n\n\n\n\n3.27\n\n\n\n\nAB16-11\n\n\n\n\n See Note 1\n\n\n\n\nAB16-11 A\n\n\n\n\n230.0\n\n\n\n239.0\n\n\n\n\n235.0\n\n\n\n250.3\n\n\n\n\n5.00\n\n\n\n11.30\n\n\n\n\n37.8\n\n\n\n7.4\n\n\n\n\n4.09\n\n\n\n2.80\n\n\n\n\nAB16-12\n\n\n\n\n160.0\n\n\n\n275.7\n\n\n\n\n161.93\n\n\n\n292.4\n\n\n\n\n1.93\n\n\n\n16.65\n\n\n\n\n12.9\n\n\n\n4.7\n\n\n\n\n13.80\n\n\n\n2.00\n\n\n\n\nAB17-01\n\n\n\n\n318.0\n\n\n\n\n319.75\n\n\n\n\n1.75\n\n\n\n\n15.6\n\n\n\n\n0.38\n\n\n\n\nAB17-02\n\n\n\n\n234.0\n\n\n\n240.0\n\n\n\n\n240.0\n\n\n\n242.9\n\n\n\n\n6.00\n\n\n\n2.90\n\n\n\n\n49.8\n\n\n\n2.2\n\n\n\n\n1.37\n\n\n\n4.25\n\n\n \n \nNote 1: Hole abandoned due to important deviation.\n\n \n \nMost of these holes were drilled to increase the amount of information on which the inferred resources calculations are based.\n\n \n \nTrue widths represent between 60% and 75% of core lengths.\n\n \n \nThe intersections were obtained at depths of about 250 meters.\n\n \n \nAdditional drilling on this property is justify as long as this kind of results continue to be obtained.\n\n \n \nQA/QC PROCEDURE\n\n \n \nN.Q. core is placed in boxes at drill site and boxes...